8,0 - WOODPICKER™ carpentry screws for structural connections of wooden elements, flat countersunk head

Type: WDCS
Technical parameters
Screw material hardened carbon steel
Coating  galvanized ≥ 8 µm
Thread diameter 8,0 mm
Screw head flat countersunk head
Screw drive torx T40
CE-14592WoodPickerRoHS2Precise&Sharp-Yellow
Features and benefits
  • WOODPICKER™ screws dedicated to professional carpentry works
  • CE certificate acc. to EN 14592+A1
  • No pre-drilling required
  • Sharp thread point and special cut prevents material splitting
  • Serrated thread part provides tight connection between material and structure
  • The countersunk head with ribs ensures a surface-flush sinking installation
  • Quick & efficient screw installation with TX40 insert bit
Application
  • Structural fixing of timber frame constructions with wood and wood-based elements
  • Fastening battens under facade boards
  • Installation of timber frame walls
  • Fastening of OSB boards to timber beams and other carpentry works

Product variants

Size d x L (mm)
Bit TX
Unit packaging (pcs)
Outer carton (pcs)
INDEX
8,0 x 80 T40 50 600 1318080
+
8,0 x 100 T40 50 600 1318100
+
8,0 x 120 T40 50 600 1318120
+
8,0 x 140 T40 50 400 1318140
+
8,0 x 160 T40 50 400 1318160
+
8,0 x 180 T40 50 400 1318180
+
8,0 x 200 T40 50 400 1318200
+
8,0 x 220 T40 50 200 1318220
+
8,0 x 240 T40 50 200 1318240
+
8,0 x 260 T40 50 200 1318260
+
8,0 x 280 T40 50 200 1318280
+
8,0 x 300 T40 50 200 1318300
+
8,0 x 320 T40 50 200 1318320
+
8,0 x 340 T40 50 200 1318340
+
8,0 x 360 T40 50 200 1318360
+
8,0 x 380 T40 50 200 1318380
+
8,0 x 400 T40 50 200 1318400
+
The screen of the Hamar app for roof fasteners visible on the screens of 3 devices

Assistance in fasteners selection

As professionals in fasteners market, we make sure that Your order is complete and adequate to Your project requirements.

WOODPICKER™ carpentry screws

Screws for structural connections of wooden elements, recommended for quality-demanding carpentry works. WOODPICKER™ screws with the specially designed thread geometry and additional sharp cut at the bottom of the thread for precise screwing without pre-drilling in both hard wood species and wood-based materials.

carpentry screws arranged on a wooden board and timber beams
P.H. HAMAR Sp.j. B. i H. Grzesiak
81-061 Gdynia, ul. Hutnicza 7, Poland
  • TEL.          +48 58 663 73 53

  • TEL.          +48 58 663 75 25

  • FAX           +48 58 663 77 19

  • E-MAIL     This email address is being protected from spambots. You need JavaScript enabled to view it.

Registration data:
VAT ID PL   585 00 05 736
REGON   190293799
KRS   0000005355
District Court Gdańsk-Północ in Gdańsk
VII Commercial Division

© Hamar 2023   |   All rights reserved