4,0-6,0 - Chipboard screws, flat countersunk head, full thread

Type: WDSTX
Technical parameters
Screw material hardened carbon steel
Coating  galvanized ≥ 8 µm / waxed
Thread diameter 4,0 mm
5,0 mm
6,0 mm
Screw head flat countersunk head
Screw drive torx T20  (Ø4,0)
torx T25  (Ø5,0)
torx T30  (Ø6,0)
CE-14592
Features and benefits
  • CE certificate acc. to EN 14592+A1
  • Sharp & precise screw tip
  • Wax coating on thread for easier and faster screwing into the material
  • The countersunk head ensures a surface-flush sinking installation
  • Installation with TX20 / TX25 / TX30 insert bit 
Application
  • Chipboard works in timber elements and substrates
  • Can also be used in plastic and plasterboards substrates

Product variants

Size d x L (mm)
Bit TX
Unit packaging (pcs)
Outer carton (pcs)
Bulk carton (pcs)
INDEX
4,0 x 20 T20 1 000 12 000 - 1340020T
+
4,0 x 20 T20 - - 20 000 1340020T-L
+
4,0 x 25 T20 1 000 12 000 - 1340025T
+
4,0 x 25 T20 - - 15 000 1340025T-L
+
4,0 x 30 T20 500 6 000 - 1340030T
+
4,0 x 30 T20 - - 12 000 1340030T-L
+
4,0 x 35 T20 500 6 000 - 1340035T
+
4,0 x 35 T20 - - 9 000 1340035T-L
+
4,0 x 40 T20 500 6 000 - 1340040T
+
4,0 x 40 T20 - - 7 000 1340040T-L
+
4,0 x 45 T20 500 6 000 - 1340045T
+
4,0 x 45 T20 - - 6 000 1340045T-L
+
4,0 x 50 T20 500 6 000 - 1340050T
+
4,0 x 50 T20 - - 5 000 1340050T-L
+
4,0 x 55 T20 500 6 000 - 1340055T
+
4,0 x 55 T20 - - 4 500 1340055T-L
+
4,0 x 60 T20 500 4 000 - 1340060T
+
4,0 x 60 T20 - - 4 000 1340060T-L
+
4,0 x 70 T20 500 4 000 - 1340070T
+
4,0 x 70 T20 - - 3 500 1340070T-L
+
5,0 x 25 T25 500 6 000 - 1350025T
+
5,0 x 25 T25 - - 10 000 1350025T-L
+
5,0 x 30 T25 500 6 000 - 1350030T
+
5,0 x 30 T25 - - 10 000 1350030T-L
+
5,0 x 35 T25 500 6 000 - 1350035T
+
5,0 x 35 T25 - - 8 000 1350035T-L
+
5,0 x 40 T25 500 6 000 - 1350040T
+
5,0 x 40 T25 - - 7 000 1350040T-L
+
5,0 x 45 T25 500 6 000 - 1350045T
+
5,0 x 45 T25 - - 6 000 1350045T-L
+
5,0 x 50 T25 500 4 000 - 1350050T
+
5,0 x 50 T25 - - 5 500 1350050T-L
+
5,0 x 60 T25 200 2 400 - 1350060T
+
5,0 x 60 T25 - - 3 000 1350060T-L
+
5,0 x 70 T25 200 2 400 - 1350070T
+
5,0 x 70 T25 - - 2 000 1350070T-L
+
6,0 x 60 T30 200 2 400 - 1360060T
+
6,0 x 60 T30 - - 1 800 1360060T-L
+

To order white zinc plated screws please add "–CE" to index, e.g. 1340020T-CE   (instead of 1340020T).

The screen of the Hamar app for roof fasteners visible on the screens of 3 devices

Assistance in fasteners selection

As professionals in fasteners market, we make sure that Your order is complete and adequate to Your project requirements.

WOODPICKER™ chipboard screws

Screws for professional chipboard works. The specially designed thread geometry facilitates screwing into both hard wood species and wood-based materials such as MDF and effectively shortens the assembly time. A sharp cut at the bottom of the thread enables quick start and precise screwing without pre-drilling, which prevents the wood from splitting during installation.

chipboard screws placed on a wooden board and screwed into a wooden beam
P.H. HAMAR Sp.j. B. i H. Grzesiak
81-061 Gdynia, ul. Hutnicza 7, Poland
  • TEL.          +48 58 663 73 53

  • TEL.          +48 58 663 75 25

  • FAX           +48 58 663 77 19

  • E-MAIL     This email address is being protected from spambots. You need JavaScript enabled to view it.

Registration data:
VAT ID PL   585 00 05 736
REGON   190293799
KRS   0000005355
District Court Gdańsk-Północ in Gdańsk
VII Commercial Division

© Hamar 2023   |   All rights reserved